Somalia Dual Planetary Mixer (Dual Power Mixer)

Double Planetary Power Mixer is a new type of mixing equipment for stirring, dissolving, dispersing and homogenizing various mixed liquids and powders. The equipment is equipped with high-speed, low-speed, movable scraper parts. The low-speed stirring parts are driven by planetary gears, and the stirring paddles also rotate while revolving, which can make the materials move up and down and around, and its mixing efficiency is several to dozens of times that of ordinary mixers. This equipment is widely used in the production of chemical products such as adhesives, organic silica gel, lithium batteries, premium inks, and premium high-viscosity coatings.

Product introduction 
1. Rotation and revolution, effective stirring and kneading, no dead angle in stirring, viscosity 0-1.5 million cps;
2. Laboratory and industrial grade to 2000L processing capacity;
3. Ultimate negative pressure -0.098-0Mpa, vacuum High degree of temperature retention;
4. Temperature controllable, accuracy ±1°C, range: 0-220°C;
5. Low-speed kneading and high-speed dispersion in one, can be run simultaneously or separately; 
6. Various stirring configurations: twist frame , claw type, door frame type, paddle type, etc.;
7. Discharge method: extrusion discharge, positive pressure discharge, pump delivery;
8. Optional: contact material material (304/316L), contact material spraying, electrical Control (explosion-proof type, control panel/PLC);
 
application fields of
high viscosity, high solid content material mixing, crushing, dispersing, etc.
1. Resin: epoxy resin, polyurethane resin, acrylic resin, hot-melt resin;
2. Silicone: silicone material, silicone oil;
3. Battery slurry: lithium battery slurry, positive and negative electrode materials, diaphragm, Conductive paste, etc.;
4. Adhesives: sealants, construction adhesives, viscose, white latex, hydrogel, etc.
5. Electronic adhesives: thermally conductive adhesives, conductive adhesives, flame-retardant adhesives, etc.;
6. Polymer composite materials, carbon fiber materials 7.
Petrochemical: anti-corrosion and anti-rust coating, solder paste, ceramic slurry;
8. Medicine: external application, internal medicine, such as cataplasm, antipyretic patch, hydrogel, hyaluronic acid, etc.
Support customers to bring and send materials for experiments, free of charge! ! !
Working conditions: heating and cooling (-10-220°C), vacuum, extrusion, various
 
product characteristics
Effective mixing: It is an effective and multi-purpose equipment integrating reaction, mixing, kneading and dispersion; the stirring paddle in the kettle also rotates while revolving, so that the materials flow up and down and around, so as to achieve the mixing effect in a short time. There is no dead angle in the mixing process and the effect is more than ten times that of ordinary mixers;
fine processing: the mixing paddle is casted at one time, the minimum distance between the paddles is 2mm, the gap between the paddle and the bottom is 1-2mm, and the distance between the paddle and the barrel wall is 2- 3mm; the inner wall of the barrel is finished by a lathe, and then automatically polished by a large polishing machine to ensure that the movable scraper on the paddle can completely hang off the material on the inner wall of the kettle when it rotates; accurate temperature: the barrel has a jacket, which can realize 
heating / Cooling and heat preservation functions; the kettle body can be heated by electricity, oil, water and steam circulation, and there is a unique temperature detection device on the drive shaft, which is in direct contact with the material to ensure accurate temperature; vacuum pressure maintenance: mechanical seal, dynamic seal and O- 
shaped The tight ring is statically sealed, so that the vacuum degree can reach -0.098MPa, and the vacuum degree is maintained at a high degree; 
strong matching type: a variety of stirring forms are available: single-axis dispersion, single-axis emulsification, double twist frame stirring, frame stirring, Paddle type, claw type, etc.; 
flexible operation: control panel: with power indicator light, digital display speedometer and speed adjustment knob, stirring start and stop buttons, lifting, emergency stop buttons, spotlights, vacuum device, temperature display, etc.; 
safety High coefficient: temperature display system, vacuum pressure maintaining system, current overload protection system, equipment positioning system; 
high degree of automation: PLC interface, speed, lifting, vacuum, temperature, formula, etc. can be integrated to achieve integrated control.

Other optional specifications

LDPPM-15L、LDPPM-20L、LDPPM-30L、LDPPM-50L、LDPPM-80L、LDPPM-150L、LDPPM-300L、LDPPM-600L、LDPPM-800L、LDPPM-1500L。